fire retardant intumescent clear coating - wood protection:
FlameGuard CC Fire Retardant Intumescent Clear Coating
Single component, chlorinated water resistant intumescent clear coating that contains highly effective fire retardants to reduce flame spread during the event of fire. The coating can be used over painted surfaces, fiber insulation, polyurethane foam, wood, and other combustible surfaces without compromising on aesthetic appeal. On curing it forms a clear, non-yellowing, water resistant fire retardant f inish that protects the substrate from combustion and heat. The coated surface retains its original appearance and in addition protected by the water & weather resistant properties.
Applications::
Painted, Stained or Varnished wood Softwood
Hardwood
MDF (FR & non-FR),
Melamine faced
Painted, Stained or Varnished wood Softwood
Hardwood
MDF (FR & non-FR),
Melamine faced

FlameGuard EIC
High performance epoxy intumescent fire protection coating system
The product is a high build, two pack material providing excellent durability combined with excellent corrosion and fire protection for a long period of time for structures, pipe work, vessels and fire resistant divisions from the effects of hydrocarbon pool and jet fires caused due to petrol, diesel, petrochemicals and gases, cellulosic fire etc., primarily intended for use in high risk environments such as oil, gas, petrochemical and power generation industries. Suitable for both offshore and onshore environments. The coating thickness required for protection is normally specified in the range of 4-20 mm. To be used as mid coat as part of a complete system in atmospheric environments followed by weather resistant aliphatic polyurethane finish coat, MonoGuard PCG. The coating facilitates as sealer function to prevent early degradation and inactivation of intumescent layer. Depending on the actual exposure of the coating system, various primers and topcoats can be used in combination with this product.
Base Coat  - FlameGuad ZP - Primer
Intermediate / Mid Coat - FlameGuard EIC
Top Coat - MonoGuard PCG - Aliphatic Polyurethane top coat
Applications::
Floating Production Storage & Off-shore loading Vessels (FPSO) Refineries
Petrochemical plants
Liquified Natural Gas (LNG) terminals
Liquified Petroleum Gas (LPG) storage facilities

FlameGuard CP
Intumescent fire protection coating for combustible single & bunched electrical cables
and cable trays

Long runs of unprotected, PVC or plastic rubber sheathed combustible cables, usually supported by vertical or horizontal cable trays and holders, are prone to rapid fire spread and excessive damage. Unprotected cables burn & propagate fire after only a few minutes of exposure to fire. Power current for vital control functions, supplies and services fails very quickly. Burning cable sheaths carry the fire rapidly forward as fast as 20 meters per minute. They gives off aggressive vapors. The cable trays, if not protected, are exposed to the risk from melting and collapsing. Cables, cable trays and holders protected with FlameGuard CP help prevent damage or keep it within reasonable limits.The time that elapses before the current fails is increased many times. The indirect damage from cable fires (fire travel, breakdowns, corrosion resulting from harmful gases affecting sensitive instruments) is generally greater than the
f ire damageinitially visible.

FlameGuard CP is a water-based intumescent coating which is designed to prevent ignition, flame spread & smoke emission along the jacketing of electrical (or other) cables and to provide a thermal barrier for protection against heat damage. FlameGuard CP will also prevent a short circuit within an electrical cable from starting a fire and will help identify the location of such a short circuit by forming an intumescent char at the spot. The coating can be applied to grouped cables or single cables.When exposed to flame or to a temperature above 175ºC, the coating forms a protective intumescent char. (This char should be removed completely and clean cables should be recoated if intumescences should occur). The coating foams up under the effect of heat to form an insulating layer.There is no sub sequent burning of protected cables after the direct effect of fire has been halted. 

The thermal conductivity of a FlameGuard CP coating that has not foamed is about the same as that of a plastic cable sheath, which means that the higher temperature of the conductor is raised only insignificantly in cables protected with FlameGuard CP. As only a relatively thin coating is needed, it allows radiation of heat from cables during operation. The current-carrying capacity remains virtually unchanged. The cured coating is flexible and adapts to the usual movements and bending without flaking. Its premium latex binder system is totally resistant to water and will not re-emulsify after drying. FlameGuard CP reduces the spread of flame in cable runs and prevents the emission of hydrochloric gases in cable fires. The release of hydrochloric acids vapors is slowed down considerably.Acid vapors that are released are neutralized.The upgradation of existing cables to the highest grade of f ire safety is possible with the coating of FlameGuard CP. Additionally the thin film coatings will maintain circuit integrity to small diametrical cables in restricted applications. The coating of the entire length of cables to maintain the power supply to important equipment while data are being saved or a fire extinguished (recommended dry film thickness 1.6 mm). Partial coating of cables (4 m length @ every 10 m interval, recommended dry film thickness of 1.6 mm) to prevent f ire from spreading along cable runs.The cable joints and around cable crossing should be coated at 1.5meteronboth sides of joints. 

Coverage: Single Cable - 1.75 Sq.m / 5 Kg @DFT 1.5 mm Thickness
Grouped /Bunched /Jacketed Cables - 1.43 Sq.m / 5 Kg @DFT 2 mm Thickness 

Applications:

Electric Power Cables
Communication Cables
Fiber Optic Cables
Control Cables
Cable Conduits
Instrumentation Cables

Junction / Crossings of Cable routes
Switch gears
Cable Trays
Racked Cables
High Rise Buildings
High Security Buildings